| Product Classification |
| Portfolio |
Blrand ® |
| Brand |
Blrand ® |
| Product Type |
Twisted pair cable |
| Regional Availability |
Asia | Australia/New Zealand | EMEA | Latin America | North America |
|
| Standards And Qualifications |
| EN50575 CPR Cable EuroClass |
Dca | s2 | d2 | a1 |
|
| Cross Section Drawing |
 Click on image below to enlarge.
 |
| |
|
|
| Construction Materials |
| Jacket Material |
Low Smoke Zero Halogen (LSZH) |
| Conductor Material |
Bare copper |
| Drain Wire Material |
Tinned copper |
| Insulation Material |
Polyolefin |
| Separator Material |
Polyolefin |
| Shield (Tape) Material |
Polyester/Aluminum shield |
|
| Dimensions |
| Cable Length |
305 m | 1000 ft |
| Cable Weight |
35.15 lb/kft |
| Diameter Over Jacket, nominal |
7.518 mm | 0.296 in |
| Jacket Thickness |
0.508 mm | 0.020 in |
|
| Electrical Specifications |
| ANSI/TIA Category |
6A |
| dc Resistance Unbalance, maximum |
4 % |
| dc Resistance, maximum |
8.00 ohms/100 m |
| Mutual Capacitance at Frequency |
5.6 nF/100 m @ 1 kHz |
| Nominal Velocity of Propagation (NVP) |
68 % |
| Operating Frequency, maximum |
500 MHz |
| Operating Voltage, maximum |
80 V |
| Remote Powering |
Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A |
| Transmission Standards |
ANSI/TIA-568-C.2 |
|
| Environmental Specifications |
| Environmental Space |
Low Smoke Zero Halogen (LSZH) |
| Smoke Test Method |
IEC 61034-2 |
| Acid Gas Test Method |
IEC 60754-2 |
| Flame Test Method |
IEC 60332-3-22 |
| Installation Temperature |
0 °C to +60 °C (+32 °F to +140 °F) |
| Operating Temperature |
-20 °C to +60 °C (-4 °F to +140 °F) |
|
| General Specifications |
| Cable Type |
F/UTP (shielded) |
| Packaging Type |
Reel or Carton |
| Pairs, quantity |
4 |
| Cable Component Type |
Horizontal |
| Jacket Color |
Blue or colors assigned by end user |
| Product Number |
3291B |
| Conductor Gauge, singles |
23 AWG |
| Conductor Type, singles |
Solid |
| Conductors, quantity |
8 |
| Drain Wire Gauge |
24 AWG |
| Drain Wire Type |
Solid |
| Separator Type |
Isolator |
|
| Mechanical Specifications |
| Pulling Tension, maximum |
11 kg | 25 lb |
