| Product Classification |
| Portfolio |
Blrand® |
| Brand |
Cat.6 FTP |
| Product Type |
Twisted pair cable |
| Regional Availability |
Asia | Australia/New Zealand | EMEA | Latin America | North America |
|
| Cross Section Drawing |
 Click on image below to enlarge.
 |
| |
|
|
| Construction Materials |
| Jacket Material |
PVC |
| Conductor Material |
Bare copper |
| Drain Wire Material |
Tinned copper |
| Insulation Material |
Polyolefin |
| Separator Material |
Polyolefin |
| Shield (Tape) Material |
Polyester/Aluminum shield |
|
| Dimensions |
| Cable Length |
305 m | 1000 ft |
| Cable Weight |
34.10 lb/kft |
| Diameter Over Jacket, nominal |
7.315 mm | 0.288 in |
| Jacket Thickness |
0.508 mm | 0.020 in |
|
| Electrical Specifications |
| ANSI/TIA Category |
6 |
| Characteristic Impedance |
100 ohm |
| dc Resistance Unbalance, maximum |
5 % |
| dc Resistance, maximum |
9.38 ohms/100 m |
| Delay Skew, maximum |
45 ns |
| Dielectric Strength, minimum |
1500 Vac | 2500 Vdc |
| Mutual Capacitance at Frequency |
5.6 nF/100 m @ 1 kHz |
| Nominal Velocity of Propagation (NVP) |
69 % |
| Operating Frequency, maximum |
250 MHz |
| Operating Voltage, maximum |
80 V |
| Remote Powering |
Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A |
| Transmission Standards |
ANSI/TIA-568-C.2 | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class E |
| Note |
All electrical transmission tests include swept frequency measurements |
|
| Environmental Specifications |
| Environmental Space |
Non-plenum |
| Flame Test Method |
CMR |
| Installation Temperature |
0 °C to +60 °C (+32 °F to +140 °F) |
| Operating Temperature |
-20 °C to +60 °C (-4 °F to +140 °F) |
|
| General Specifications |
| Cable Type |
F/UTP (shielded) |
| Packaging Type |
Reel |
| Pairs, quantity |
4 |
| Cable Component Type |
Horizontal |
| Jacket Color |
Blue |
| Product Number |
65NS4-i |
| Conductor Gauge, singles |
23 AWG |
| Conductor Type, singles |
Solid |
| Conductors, quantity |
8 |
| Drain Wire Gauge |
24 AWG |
| Drain Wire Type |
Solid |
| Ordering Note |
Available in Asia Pacific |
| Separator Type |
Isolator |
|
| Mechanical Specifications |
| Pulling Tension, maximum |
11 kg | 25 lb |
